Save a U.S. ZIP code for this browser. Final freight, accessorial services and delivery scope are confirmed during checkout or quotation.
We may estimate your ZIP from your network location. Precise device location is requested only when you click “Detect my ZIP.” Confirm or replace either result at any time.
Images are representative. Confirm the exact model, configuration, dimensions and included components before ordering.
Use the manufacturer model for technical documentation and purchase orders. This catalog number is our internal reference—not a UPC or GTIN.
$39,999.00
Available to order. Final availability is confirmed during fulfillment.
Delivery: Available methods and charges are confirmed for the equipment and destination. Large or specialized equipment may require freight delivery.
Use this product as the starting point. Our team will review compatibility, controls, operating conditions and project scope before preparing a formal response.
U.S. Pathology Equipment supports institutional purchasing and equipment coordination. Cooler catalog expertise is reinforced through MyMortuaryCooler.com, while the product manufacturer and model shown above remain the controlling product identity.
8-Body Vault Morgue Cooler is cataloged by U.S. Pathology Equipment for pathology, anatomy, morgue, mortuary, forensic, veterinary, research and institutional facility projects.
The 8-Door Vault-Style Morgue Cooler (Model 1070-2MB8) is an institutional-grade individual-access mortuary cabinet — 8 isolated chambers with stainless steel slide-out trays. Built for hospital morgues, regional medical examiner facilities, county coroner offices, university anatomy programs, and forensic centers where per-case dignity and cold-loss control matter more than aggregate body density.
The 8-Door is the mid-tier vault in the 1070 series. Step down to the 3-Door Vault (Model 1070-3MBS) or 2-Door Vault (Model 1070-2MB2). Step up to the 9 Bay Vault, 12 Bay Vault, or 15 Bay Vault.
Full catalog: multi-bay vault morgue coolers. For walk-in alternatives at similar capacity, see the 8×10 walk-in (7-body) or 8×12 walk-in (9-body). Background: medical examiner equipment guide · forensic lab cooler guide.
A walk-in with parallel racking optimizes for body density per square foot. A vault-style cooler optimizes for per-case isolation — one door, one chamber, one case. That isolation matters for medical examiner facilities running active forensic cases (chain-of-custody), hospital morgues serving family viewing requests, and any facility where the cold-loss math of a full-cabinet door swing is a material issue at high case-cycle frequency.
Stainless steel slide-out trays let a single operator extract the case without disturbing adjacent chambers. The 8-Door configuration sits at the workflow sweet spot where individual-access density justifies the per-case footprint cost.
| Model number | 1070-2MB8 |
|---|---|
| Capacity | 8 cadavers, individual chamber access |
| Door configuration | 8 doors, one per chamber |
| Tray system | Stainless steel slide-out trays |
| Interior construction | 304 stainless steel |
| Cabinet | Modular insulated panels, 4″ urethane core |
| Refrigeration | Self-contained or remote split — Copeland scroll, Heatcraft, Russell available |
| Operating range | 34–40°F body holding — see temperature guide |
| Voltage | 208–230V, single-phase or three-phase |
| Certifications | NSF, UL, ASTM E84 Class A, DOE/EPA EISA 2007, Prop 65 |
| Warranty | 10-year structural |
| Country of origin | United States — Johnson City, Tennessee |
| Manufacturer | American Mortuary Coolers |
The 8-Door Vault is specified for hospital morgue, ME/coroner, university anatomy, and forensic facility AHJ review. Documentation that ships with every quote: spec sheet, electrical schedule, NSF/UL listings, ASTM E84 panel certifications, structural drawings, mechanical drawings for any remote-split build. Net terms available for institutional, government, and federal buyers.
See county morgue requirements 2026 and state body-storage code for AHJ-relevant background.
Built-to-order. Standard lead time 6–8 weeks from quote confirmation. Pre-order site survey strongly recommended at this footprint — covered in the installation guide.
$39,999.00 factory direct.
Ships from Tennessee on freight pallets. See delivery times by region.
Regional desks: Southeast · Midwest · Northeast · Southwest · Rocky Mountain · Pacific · Canada.
Comparable 8-door vault-style coolers from MOBI Lab (mobilab.us), Mopec, and Mortech typically run higher per-unit at comparable refrigeration tonnage with 8–12 week lead times. See the MOBI vs AMC comparison and Mopec alternative articles.
Eight cadavers, one per individually-accessed chamber.
Vault-style optimizes for per-case isolation rather than aggregate density — relevant for ME/coroner facilities running active forensic cases, hospital morgues handling family viewing, and any facility where cold loss per door event matters at high case-cycle frequency.
34–40°F body holding standard across all 8 chambers.
6–8 weeks from quote confirmation. Built to order.
Factory-direct American manufacturing, faster lead times, published 10-year warranty. mobilab.us and Mopec equivalents typically carry 8–12 week lead times at comparable refrigeration spec.
Yes. 0% Shop Pay Installments at checkout for qualified buyers, 1% back. Automatically qualifies for extended financing. Net terms available for institutional and federal buyers.
Johnson City, Tennessee. American Mortuary Coolers, family-owned American manufacturer since 2009, A+ Rated by the Better Business Bureau.
Direct procurement: 1-888-792-9315 · po@mymortuarycooler.com · request catalog · dealer inquiries
Return Policy: All coolers, racks, lifts, and other products are non-returnable — no exceptions. All refrigeration products purchased on or after 1/1/2026 are 100% non-returnable under any circumstances. Please review our full Return Policy before purchasing.
For facility packages, bid schedules, quantity pricing, freight coordination, submittals or option verification, add this item to an RFQ or contact U.S. Pathology Equipment before ordering. Confirm dimensions, utilities, accessories, delivery access and installation responsibility for your project.
Delivery methods, charges and estimated timing are confirmed for the selected equipment and destination. Inspect freight before installation and promptly document visible or concealed damage. Liftgate, limited-access, inside-delivery and other services must be included in the written order scope.
Current manufacturer documentation and the written order govern product coverage. Keep equipment uninstalled, unenergized, complete and in its original packaging while any return request is reviewed. Authorization is required before a return is shipped.
Compare live catalog options and verify exact compatibility before combining components.
Save $4,224.00
Model Model 1070-09MB-1 Catalog # USPE-MMC-9883858436398
$41,506.99
From $37,282.99
Available to order
Model Model 1070-3MB6 Catalog # USPE-MMC-9880747770158
$34,497.54
Available to order
Model Model 1070-15MB-1 Catalog # USPE-MMC-9883848671534
From $79,102.99
Available to order
Move from one item to a coordinated equipment package, with product, room and procurement requirements reviewed together.
